How do I insert the SD card correctly? The SD card is inserted with the connector pins facing to the right (towards the PCB).bgColorNone The SD card is inserted with the connector pins facing to…

How do I format my SD card correctly? Formatting for SD cards: File system: FAT Size of the allocation units: Standard size If the SD card has more than 4GB, it must be partitioned. Maximum…

What does SD Card Log Factor 60 mean? 60 = 1 line every minutebgColorNone 60 = 1 line every minutebgColorNone

How can I establish a GSM connection? The 2 digital outputs can be used to connect a GSM switching module. The specifications for this can be found in the wiki at github.com/easymetalbgColorNone …

Is Modbus data transmission possible? No, Modbus is not supported.bgColorNone No, Modbus is not supported.bgColorNone

The measured values of conductance input and conductance output are not correct. Please check on the About screen which E.KO IONISER® type (1501 or 1502/1503) you have set. You can set the…

What do the LEDs under the right cover mean? Behind the right cover (K10 in the manual) are extended operating elements, including 2 LEDs (K10.4 and 10.5). You can see the status of the…

Black screen on KORROSTOP4.0® If a sleep mode has been set on the KORROSTOP4.0®, the screen remains black even if the water is flowing. Only when the screen is touched does the KORROSTOP4.0® switch…

What does a yellow cogwheel on the About screen mean? To indicate the status of a connection (e.g. WLAN, network, console), there is a green tick for "connected", a red cross for "not configured"…

Problems with the WLAN connection. For correct WLAN configuration, the WEB and REST server must be activated. Check on the About screen if the WEB and REST server are activated (picture). Under…