How do I store the E.KO IONISER® correctly? The following storage conditions must be observed: - maximum storage time 6 months - Storage temperature 5 - 35°C - protect from frost and direct…

How does the exchange and return of the E.KO IONISER® work? There is no water loss in your wire EDM machine during the exchange. Leave the water in the E.KO IONISER® in the unit. The system is…

How long is the service life of the E.KO IONISER®? The E.KO IONISER® has quite a long service life, and can be compared to the capacity of 200 litres of mixed bed resin. However, the service life is…

What do I do in the event of damage? Contact your dealer and submit a damage report. Your dealer will complete the damage report with you and forward it to us.  If this is a complaint, your…

How is the E.KO IONISER® disposed of? The E.KO IONISER® is a rental unit and, therefore, the unrestricted property of easymetal GmbH. Disposal must be made exclusively to the supplier (owner). The…

Can I connect the E.KO IONISER® with the CONNECT 4 components to any EDM machine (manufacturer independent)? Yes. With the CONNECT4 connection kit, you can connect the E.KO IONISER® to any EDM…

Why does the display on the KORROSTOP4.0® flash? If the KORROSTOP4.0® has no flow for more than 60 seconds, the whole display flashes. During this time, the measured values are unreliable! The…

What is the measuring range and deviations of the KORROSTOP4.0®? Water conductance input: min. 0,1 µs/cm max. 50,0 µs/cm Deviation < +-5 % Water conductance output:…

What is the max. measurable flow rate with KORROSTOP4.0®? The maximum measurable flow rate is 0 - 25 l/minbgColorNone The maximum measurable flow rate is 0 - 25 l/minbgColorNone

How high may the max. water pressure be with KORROSTOP4.0®? The maximum water pressure must not exceed 6 bar.bgColorNone The maximum water pressure must not exceed 6 bar.bgColorNone