"Check level probe" message The plant is no longer producing. The following measures are to be taken: Check that the level probe is plugged in correctly. Check the cable for cable breakage. The level…

"Tank overfill" message The switch-off delay causes the tank to overfill for 15 seconds. Duration: max. 1 minutebgColorNone The switch-off delay causes the tank to overfill for 15 seconds. …

"STOP external" message An external alarm signal causes an emergency stop of the system (e.g. pre-filter system).bgColorNone An external alarm signal causes an emergency stop of the system (e.g.…

Which EASYRO® model is right for me? The right EASYRO® model depends on your application and your peak water demand. Please find out your water requirements. We will be happy to advise you…

Does the EASYRO® system also filter bacteria, viruses, heavy metals and medical residues out of the water? Yes. The pore size is more than 1000 x smaller than viruses, bacteria or parasites.…

What happens to the pollutants that are filtered out? The filtered-out pollutants are permanently flushed into the sewer by the automatic membrane flushing with the wastewater. More about reverse…

What is the ratio of osmosis water to waste water and why? Depending on the input water (degree of hardness of the water) and the water temperature (15°C = optimum working temperature according to…

Can the EASYRO® system become contaminated? If the EASYRO® system is in continuous production and is not shut down without preservative due to annual leave, germination in the system can almost be…

Does a UVC immersion lamp have to be in the tank? To ensure that the complete water treatment system remains clean, we recommend a UVC immersion lamp in the stainless steel tank.bgColorNone To…

Is osmosis water the same as distilled water? While both reverse osmosis system and distillation units effectively reduce the level of "dissolved solids" in water, the processes are quite…