When do filters and membranes need to be replaced? Filter change: The maintenance interval for an EASYRO® system is 4,500 operating hours. If "CHANGE FILTER" appears on the display, the…

How do I have to conserve my EASYRO® when I go on holiday? The preservative is drawn into the unit in the same way as the membrane cleaning agent during maintenance, but remains in the unit until…

Where can I order the preservative? You can order the preservative from your dealer or directly from us. The suitable quantity depends on the type of your EASYRO® system (120/150, 240/300,…

Is it possible to disinfect the system? If the six-monthly maintenance of your EASYRO® system is carried out by our technicians, the complete water treatment including the stainless steel tank can…

"MOTOR TEMP ALARM" message The temperature of the motor is too high. The system switches off automatically at a temperature of 75ºC and restarts as soon as the engine temperature has dropped to 65ºC…

"Low pressure" message Please unplug the mains plug from the socket and plug the unit in again. If the error message is still displayed, there are the following possibilities Bypass pressure…

Venting in case of "Pressure deficiency" Press and hold ESC + right arrow for at least two seconds. The display shows "VENT" and the system opens the valves and flushes for 3 seconds. After…

"Empty tank" message This message only appears on systems with an external unpressurised tank. The message resets automatically as soon as there is water in the tank.bgColorNone This message only…

"EMERGENCY STOP leakage" message – Water leakage This error message indicates a water leakage from the unit. The system stops automatically. Please call a service technician.bgColorNone This…

"Check membrane" message This message appears if the conductance remains ≥ 40µs/cm after 10 minutes. The system stops after 10 minutes of a fault. This message only appears when the fault is…