FAQ
henndrixx®

General

henndrixx® has the active ingredient: Active chlorine released from hypochlorous acid.
Concentration: > 300 mg/L

Active substance and manufacturer are listed on the ECHA Art. 95 list for PT 1-5.
BAuA Reg. No: N-90469

The BAuA Reg. No. is: N-90469

Yes, henndrixx® is a liquid, ready-to-use, highly effective biocide for combating viruses, bacteria, moulds, coliforms, algae and legionella.

henndrixx® must be used within 3 months after opening in the original container under optimal storage conditions. 
Do not use after the expiry date.
Storage temperature: 0°C to 25°C
Protect from frost, heat and direct sunlight.

Please always read the label and product information before use.
Biocidal products must be used with care.

henndrixx® Storage conditions:

Storage temperature: 0°C to 25°C
Store tightly closed in the original container. 
Protect from frost, heat and direct sunlight.

Please always read the label and product information before use.
Biocidal products must be used with care.

Please refer to the safety data sheet for all information on correct disposal. 
The product is not subject to classification as a hazardous substance according to CLP Regulation 1272/2008.

Anolyte is formed from common salt and water during electrolysis.

An anolyte is a liquid, highly effective disinfectant for combating pathogens.
If evaporation of active chlorine is undesirable and corrosion is to be avoided, a pH neutral anolyte is used.

The concentration of the active ingredient active chlorine released from hypochlorous acid in the henndrix® disinfectant > is 300 mg per litre.

Simply explained, the redox value is the oxidation or disinfection power.
The higher the value, the higher the effectiveness against impurities.