That is how deionized water with low conductivity and an optimal ph is generated today.
Everyone knows of it, almost everyone has one - the E.KO IONISER® 1501.
The use of the E.KO IONISER® 1501 has proven itself already many thousands of times and is considered the base for the best and constant water quality in the field of EDM.
This device shows its full strength when used within the scope of the standard applications.
Here it scores with its wide range of usage Options.
| Max. flow rate | 40l/min |
| Min. flow rate | 1 l/min |
| Max. operating pressure | 5 bar |
| Max. Input conductance | 2500 µs/cm1 |
| Conductance | < 0,01 µs/cm1 |
| Permissible Input pH value | 6,5-9,5 |
| Weight | 160 kg |
| Diemensions mm (L/W/H) | 660/370/1150 |
| EASY quick coupling | CPC 1/2" |
| Equivalent mixed bed resin | approx. 200 liter |
The two equivalent systems E.KO IONISER® 1501 and 1502 perfectly complement their different application areas and are not interchangeable due to their various usage scopes. The E.KO IONISER® 1502 was designed specifically for special applications in the carbide field.
The many years of practical experience has shown that the E.KO IONISER® 1502 is the technically and economically optimal solution in terms of carbide.
| Max. flow rate | 40l/min |
| Min. flow rate | 1 l/min |
| Max. operating pressure | 5 bar |
| Max. Input conductance | 2500 µs/cm1 |
| Conductance | < 0,01 µs/cm1 |
| Permissible Input pH value | 6,5-9,5 |
| Weight | 160 kg |
| Diemensions mm (L/W/H) | 660/370/1150 |
| EASY quick coupling | CPC 1/2" |
| Equivalent mixed bed resin | approx. 200 liter |
The E.KO IONISER® 1503 UPW (ultra pure water) has been specially developed for the smoothing of already treated water. In combination with our EASYRO® reverse osmosis equipment, we guarantee ultrapure water of the highest Quality.
Depending on the incoming water, the EASYRO® reverse osmosis system lowers conductivity to 10-50 µs/cm1. With the E.KO IONISER® 1503 as subsequent smoothing, we guarantee a conductivity of up to 0.01 µs/cm1(TREF25).
Dissolved inorganic ions are easily removed.
The resistance after treatment is 18.2 MΩ (at 25 °C) with a TOC value of <1 ppb.
| Max. flow rate | 40l/min |
| Min. flow rate | 1 l/min |
| Max. operating pressure | 5 bar |
| Max. Input conductance | 2500 µs/cm1 |
| Conductance | < 0,01 µs/cm1 |
| Permissible Input pH value | 6,5-9,5 |
| Weight | 160 kg |
| Diemensions mm (L/W/H) | 660/370/1150 |
| EASY quick coupling | CPC 1/2" |
| Equivalent mixed bed resin | approx. 200 liter |
