The redundancy principle is the most common procedure to prevent the failure of important components.
These additional resources provide for:
ETHERNET (master/slave connector) in the rear of the system is used to connect the two pendulum systems with one another.
The following variants of the redundancy design are possible:
The system consists of 2 working systems (master + slave). One system is the designated master and takes over the main control.
Alternately, only one system at a time is active.
The master (system A) is working. The slave (system B) is in "Stand by" mode waiting for its signal.
The master passes the signal to the slave. The slave (system B) starts to work. While the slave works (system A), the master is now in the "Stand by" mode.
To cover any dispensing peaks, the pendulum system provides an optimal Feature.
While in dual mode, both units (A + B) work simultaneously as one unit. This means twice the power is
available to you.