easymetal

Part cleaning &
ultracleaning, 
production processes 

 

The optimization of a part cleaning procedure is more complex, depending on how complex the finished workpieces are. 

For a reproducible, perfect cleaning, result, a reliable overall solution in terms of water treatment is needed.
Our EASYRO® reverse osmosis system with subsequent polishing provides the best water quality, free of residues.

Best rinsing efficiency.

 

An increased or changing lime content in the rinsing water has a major impact on the success of the production process. The purer the rinsing water, the better the cleaning result.

Ultra pure water for highly sensitive production processes.

 

Depending on the incoming water, the EASYRO® reverse osmosis system lowers the conductance value to 10-50 µs/cm1. Its filtration efficiency is at 95-99% for all residues in the water.

With the E.KO IONISER® 1503 as subsequent polishing, we guarantee a conductance value of up to 0.01 µs/cm1(TREF25).

Process water of the highest level of quality.

 

Residue-free, wettable surfaces of substrates are a prerequisite for a successful coating.

Especially the critical cleaning of implants, filigree workpieces or sensitive optical elements represents a great challenge and requires fully demineralized water with a low conductance value.

Coating-ready rinses.

 

The extremely low constant conductance of up to 0.01 µs/cm1 and an optimal pH of the fully demineralized water guarantee clean and spotless parts ready for coating.

After drying, the parts remain residue-free down to the deepest Corner.

Ultrapure water as a basis for cooling lubricant emulsion preparations

 

The range of water-miscible cooling lubricants currently on the market leaves nothing to be desired.
However, the quality of fresh water for the preparation often turns out to be problematic. Metal salts or other residues in fresh water affect the work processes.
In terms of more efficient processes, as well as a qualitative result, a fresh preparation with treated water proved to be advantageous many times.

Ultrapure water as a preparation medium extends not only the life of the emulsion, it also lowers the total process costs through increased operating reliability.

Whether osmosis water or fully demineralized water, we offer an optimal total solution according to your Needs.

Depending on the incoming water, the EASYRO® reverse osmosis system lowers the conductance value to 10-50 µs/cm1.
If a specific constant conductance value is required, the desired conductance value of 2-400 µs/cm1 can be adjust at the pure water outlet with blending attachment. Here, a permanent conductance measurement controls the quality of the pure water.

If you need fully demineralized water as preparation water, subsequent polishing of the osmosis water with the
E.KO IONISER® 1503 is recommended. After the polishing, we guarantee a conductance value of up to 0.01 µs/cm1(TREF25).

Industry 4.0

 

Our EASYRO® reverse osmosis systems are equipped with the latest Siemens technology.

The Siemens Logo! 8 control offers networked and mobile communication in real-time.

 

Learn more about the function of the control >>

Contact one of our sales representative for a free consultation. We gladly assist you with our expertise and put together the right water treatment system for your specific requirements.