easymetal
EASYRO® Wasseraufbereitunsanlagen

Ultrapure water
by reverse osmosis

Our EASYRO® systems work on the basis of reverse osmosis and produce ultrapure and residue-free water reliably, economically and in an environmentally-friendly manner.

Select one of three sizes depending on your water needs. Due to the modular design, a later system expansion is possible without great effort.

Go to the design of the EASYRO Systems >>

EASYRO® 150
EASYRO® 300
EASYRO® 300

Go to the technical data of the EASYRO Systems >>

 

All EASYRO® water treatment systems can be used as a pressure-controlled version in combination with a membrane boiler or with level adjustment (level probe) in combination with an unpressured tank and pump.

The following simplified charts show the possible configurations.

 EASYRO® as base cabinet variant with membrane boiler with outlet Fitting. 

This base cabinet variant is suitable for small water needs.

Mounted in the cabinet under the sink, it is frequently used for feeding individual pieces of equipment or washers.

 EASYRO® 300 pressure-controlled with membrane boiler

 EASYRO® 300 with unpressured tank (stainless steel or plastic) and pump

Under the Tank Systems navigation item, we depict the various combination possibilities with all tanks from our Portfolio.

Redundant system - pendulum system

 

The EASYRO® 300 and 600 are also available as a redundant system. As a reliable pendulum system, it increases the reliability of production-critical components and thus provides increased operating reliability.

Learn more about the redundancy System >>

Bild E.KO IONISER® 1503 UPW (Ultra Pure Water)

UPW - Ultra Pure Water

 

The E.KO IONISER® 1503 UPW (ultra pure water) has been specially developed for the smoothing of already treated water. In combination with our EASYRO® reverse osmosis equipment, we guarantee ultrapure water of the highest Quality.

Depending on the incoming water, the EASYRO® reverse osmosis system lowers conductivity to 10-50 µs/cm1. With the E.KO IONISER® 1503 as subsequent smoothing, we guarantee a conductivity of up to 0.01 µs/cm1(TREF25).

Typ 1 - Standard.

 

Dissolved inorganic ions are easily removed.
The resistance after treatment is 18.2 MΩ (at 25 °C) with a TOC value of <1 ppb.

Go to the technical data of the E.KO IONISER >>